RF Original Solutions
High-frequency and low-frequency RF products that are unique to Samtec. This includes Bulls Eye® for test and measurement, Magnum RF™ multi-port blocks and cable assemblies, Flexible Waveguide for E-band, Ganged and Micro-Mini Systems, 100 Ohm Shielded Twisted Pair Assembly, IsoRate® high-isolation RF, and 75 Ohm or high-vibration MMCX solutions.
Bulls Eye®Bulls Eye® RF High-Performance Test to 90 GHz
Bulls Eye® high-performance test assembly features a high-density space saving design that enables smaller evaluation boards and shorter trace lengths in test and measurement applications. The Bulls Eye® block compression mounts to the board for placement directly adjacent to the SerDes being characterized. The solderless design improves overall cost and is easy to use within a lab setting.
Features
- 90 GHz, 70 GHz, 50 GHz and 40 GHz test assemblies
- Compression mounts to the board for placement directly adjacent to the SerDes being characterized
- Solderless design improves cost
- Easy to use within a lab setting
- Microstrip/CPW or Stripline PCB transmission
- End 2 connection to instrumentation: 1.00 mm, 1.85 mm, 2.40 mm or 2.92 mm
- High-density, space-saving design
- Single or double row
- Test boards available for performance verification
- RF Group: dedicated RF engineers provide personal support for meeting specific RF challenges
Magnum RF™ Magnum RF™ Ganged, Multi-Port, High-Frequency Connectors
Ganged, multi-port RF blocks and cable assemblies for millimeter wave applications. Ideal when space is limited and a high operating frequency is required.
Features
- High-density, space-saving design
- Push-on interface with varying retention forces
- Ganged, SMPM connectors: operate mode-free up to 65 GHz
- Micro-miniature SMPM style enables smaller bundle sizes for weight savings and increased airflow
- 50 ohm impedance
- Cable-to-board and board-to-board solutions
- Bullet adaptors allow for axial and radial misalignment, and blind mate
Flexible WaveguideFlexible Waveguide Cable Assemblies and Adaptors
Samtec’s new, high-frequency micro waveguide technology supports the demands of next generation millimeter wave systems. It uses a cable design allowing flexibility and a reduced size, yet also maintains loss performance similar to that of a traditional waveguide.
Features
- Flexible and dynamically stable
- Near-zero loss performance
- Ultra-small form factor
- High-frequency, micro
- Frequency bands supported: E-band and V-band
- E-band (60 GHz to 90 GHz)
- V-band (50 GHz to 75 GHz)
Ganged Micro ScaleGanged Micro Scale RF Jacks, Plugs, and Cables
Samtec's ganged micro-miniature high-performance RF jacks, plugs, and cables are on a 5.00 mm pitch and available as board-to-board or cable-to-board systems.
Features
- Performance to 6 GHz
- 50 ohm and 75 ohm solutions
- Full ganged system or ganged with industry standard end 2 options
- Micro-miniature, rugged contacts
- Optional captive panel screws
- Single or double-ended cable assemblies
- Optional threaded inserts
Shielded Twisted Pair CableShielded Twisted Pair Cable System
High-speed shielded twisted pair cable assembly for 100 ohm applications.
Features
- 100 ohm signal routing
- 28 AWG shielded twisted pair cable
- Terminal and socket end options available
- Choice of cable length
IsoRate®IsoRate® High-Isolation RF Connectors and Cables
These IsoRate® high-isolation RF connectors and cables offer substantial savings over traditional RF connectors at approximately half the cost.
Features
- Half the cost of traditional RF at virtually the same performance
- Edge Rate® contacts for high-isolation
- 50 ohm board-to-board systems
- 50 ohm full ganged system or ganged with industry standard end 2 options
- Positive latching available
Micro-Mini 75 OhmMicro-Mini 75 Ohm RF Connectors and Cables
Micro-mini interconnects with higher extraction force.
Features
- Performance to 6 GHz
- Simple snap-on coupling
- Straight plug or jack
- RG 179 cable termination
High-Vibration MMCXHigh Vibration MMCX
Micro-miniature interconnects with snap-on coupling for high-vibration applications.
Features
- Simple snap-on coupling
- Ideal for high-vibration environments
- 50 ohm impedance
- RG 316 and RG 174 cable options
- Non-magnetic options available for medical and aerospace applications
© 2024 Samtec. All rights reserved.
Your Privacy Choices