High-Speed I/O Cable Assemblies
High-speed I/O cable assemblies, optical and low skew pair copper, with rugged latching systems and shielded EMI protection for rugged, panel-to-panel applications. Assemblies include HyperTransport™ HT 3.1 performance on the industry’s densest I/O system, micro pitch design for board space savings, and SFP+ jumpers up to 20 Gbps data transmission.
ExaMAX®ExaMAX® I/O Shielded, High-Density Cable System
Fully shielded, EMI protected I/O cable system using proven ExaMAX® technology with two reliable points of contact for 64 Gbps PAM4 (32 Gbps NRZ) performance in a cable-to-panel configuration.
Features
- Fully shielded external cable and cage for EMI protection
- Enables 64 Gbps PAM4 (32 Gbps NRZ) electrical performance on 2.00 mm column pitch
- PCIe® 6.0/CXL® 3.1 capable
- 24 to 72 pairs (4 and 6 pairs; 6, 8, 10 and 12 columns)
- Single port cage designed for use with ExaMAX® right-angle board connector (EBTM-RA)
- Rugged pull latch for mating/unmating
- 30 and 34 AWG Eye Speed® ultra low skew twinax cable
- Individual signal wafers with staggered differential pair design
- One-piece embossed ground structure on each signal wafer to reduce crosstalk
- Roadmap: cable-to-cable bulkhead panel connection for increased performance to 112 Gbps PAM4
Flyover QSFP Cable SystemsFlyover QSFP Cable Systems
These direct attach flyover QSFP cable assemblies improve signal integrity and increase signal path length at higher data rates.
Features
- Compatible with all MSA QSFP pluggables
- 4 or 8 channel systems
- Eye Speed® 100 ohm twinax cable
- Press-fit tails for low speed signals/power to PCB
- No re-timers required for reduced cost and power consumption
- Improved thermal dissipation by allowing ICs to be placed in preferred locations
- Multiple end 2 options available
- Belly-to-belly mating for maximum density (FQSFP-DD Series)
NovaRay® I/ONovaRay® I/O Extreme Performance Panel Mount Cable System
NovaRay® I/O uses Flyover® cable technology to route up to 3584 Gbps PAM4 aggregate data from the IC package to the panel and beyond.
Features
- Highest aggregate data rate on the market - 3,584 Gbps PAM4
- 16 & 32 diff pair configurations; accommodates PCIe® x4 or x8 plus sidebands
- Cable-to-cable bulkhead panel connection using Flyover® cable technology
- External Cable: 28 or 34 AWG twinax
- Internal Cable: 34 AWG twinax
- Single-Ended coax options also available
- Full external EMI shielding
- Multiple end 2 high-speed connector options available for your ASIC-adjacent Flyover® interconnect
URSA® I/OURSA® I/O Ultra Rugged Power Cable System
URSA® I/O features a hyperboloid-type contact for extreme reliability and high mating cycles in ultra rugged applications with EMI protection.
Features
- Four points of contact for an extremely reliable connection
- Hyperboloid-type contact for extreme high mating cycles
- Micro 1.00 mm pitch in double row space saving design
- Extreme density with up to 1,450 total I/Os in a 1RU panel (29 cables at 50 total I/Os each)
- Cable-to-cable and cable-to-board solutions
- EMI shielding to limit signal degradation and optimize performance
Firefly™ Micro Flyover System™FireFly™ Micro Flyover System™
Future-proof system with interchangeability of FireFly™ copper and optical using the same micro connector system for up to 28 Gbps per lane.
Features
- High-speed performance to 28 Gbps per lane
- x4 and x12 designs
- Variety of integral heat sink and End 2 options
- Interchangeability of copper and optical
- Micro rugged two-piece connector
- Extended temperature and PCIe®-Over-Fiber solutions
Eye Speed® I/OEye Speed® I/O
Rugged high-speed cable systems feature a positive latching system and support multiple protocols.
Features
- Performance to 25.5 Gbps for equalized cable (1.00 m)
- Equalized option increases usable cable length and data rate
- Small form factor for space saving applications
- Micro rugged latching system
- Shielded housing for EMI protection or sealed cable for IP68 applications
- Supports SAS, SATA, Fibre Channel, Ethernet, PCIe® and InfiniBand™ protocols
- High-reliability Edge Rate® contacts
Eye Speed® HDEye Speed® HD High-Speed I/O Systems
Ultra high-density, high-speed cable system with HyperTransport™ HT3.1 performance, designed for rugged applications and EMI protection.
Features
- Superior signal integrity with HyperTransport HT3.1 performance
- Industry's densest I/O cable system
- Rugged latching system
- Shielded for EMI protection
- Cable, connector, and cage available
- Rugged design
SFPSFP+ Cables and Systems
Samtec's SFP+ cables and systems include a panel mounted connector and jumper cable for high-speed applications.
Features
- Performance to 10 Gbps
- SFP+ compatible
- Cables, connector and cages available
- Connector and cage kits available
- Single and multi port cages available
USB Board Level Interconnects and Cable AssembliesUSB Board Level Interconnects and Cable Assemblies
Samtec’s USB systems include standard, rugged, and sealed USB Type A, USB Type B, Type AM, or Mini USB 2.0 interfaces with choice of interface type.
Features
- USB and Mini USB
- Various orientations, types, terminations
- Rugged options available
- Rugged overmold cables with various end options
- 2.0 version available
- High-cycles
© 2024 Samtec. All rights reserved.
Your Privacy Choices