Rugged High Speed Connectors
Build your mated connector set using Samtec’s High-Speed Board-to-Board Solutionator®. Rugged high speed connectors with rugged Edge Rate® contacts, increased insertion depths, and rugged designs for contact protection during mating and unmating.
Q2™Q2™ Rugged/High-Speed Interconnects
These rugged, high-speed connectors feature a ground plane and high-wipe contacts.
Features
- Performance to 25 Gbps NRZ
- Increased insertion depth
- Dual stage hot pluggable
- Integral ground/power plane
- Shielded option available
- Power combo option
- Contacts: Up to 208 I/Os
- Stack height: 10.00 mm - 16.00 mm
Edge Rate®Edge Rate® Connector Strips
Rugged Edge Rate® contact systems optimized for signal integrity performance.
Features
- Edge Rate® contacts optimized for signal integrity performance
- 1.5 mm contact wipe
- Robust when "zippered" during unmating
- Up to 56 Gbps PAM4 performance
- 0.50 mm, 0.635 mm or 0.80 mm pitch systems
- Stack heights from 5 mm to 18 mm
- Extremely slim 2.5 mm body width on 0.635 mm pitch system
- 0.50 mm pitch system for up to 40% PCB space savings vs 0.80 mm pitch system
Q Rate®Q Rate® Slim, Rugged High-Speed Interconnects
Samtec Q Rate® connectors have a slim footprint, integral power/ground plane, and Edge Rate® contacts for superior SI performance.
Features
- Performance to 28 Gbps
- Rugged Edge Rate® contacts
- Integral ground/power plane
- Up to 156 positions
- Slim footprint (less than 5.00 mm wide)
Razor Beam™Razor Beam™
High-speed, high-density Razor Beam™ self-mating systems reduce inventory costs and are available in a variety of pitches and lead styles for increased flexibility.
Features
- 0.50 mm, 0.635 mm or 0.80 mm pitch systems
- Razor Beam™ contacts for high-speed and fine-pitch systems
- Mating and unmating forces approximately 4-6x greater than typical micro pitch connectors
- Shielded option for EMI protection
- Self-mating connectors reduce inventory costs and can be interchanged for varying stack heights
- 10 stack height options from 5 mm to 12 mm
- Up to 100 contacts
- Parallel, perpendicular and coplanar systems
- Audible click when mated
- Lubricated option available
Floating Contact SystemHigh Speed Floating Connectors
These high speed floating connectors provide 0.50 mm of float in the X and Y directions to minimize mating alignment errors.
Features
- Provides 0.50 mm (.0197") float in X and Y directions
- Ideal for multiple connectors on a board
- Up to 60 floating contacts
- Choice of body height and right-angle design
© 2024 Samtec. All rights reserved.
Your Privacy Choices