IDC & FFC Cables
IDC cables, IDC connectors, FFC cables and connectors, & ribbon cable connectors with high reliability Tiger Eye™ contacts on 1.27 mm and 2.00 mm pitch, as well as dual beam contacts on 2.54 mm pitch. Choice of socket and plug terminations, low profile and slim body designs; ejector, shrouded and elevated headers for mating, and optional locking clips and caps for more rugged applications.
.100" (2.54 mm) Pitch IDC Systems.100" (2.54 mm) Pitch IDC Systems
Mates with .025" (0.635 mm) square post terminal strips.
Features
- Any pin count from 2 to 36 per row
- Low profile/slim body design
- Single and double row
- Socket and terminal assemblies
- Mating shrouded & ejector terminal strips
- Wide variety of standard wiring configurations
2.00 mm (.0787") Pitch IDC Systems2.00 mm (.0787") Pitch IDC Connectors, Terminals, and Sockets
This 2mm pitch IDC Connector mates with 0.50 mm (.0197") square post terminal strips.
Features
- High-performance Tiger Eye™ contacts
- Choice of socket and plug terminations
- Low 5.08 mm (.200") profile
- Variety of options including strain relief
- Mating shrouded & ejector terminal strips
- Wide variety of standard wiring configurations
.050" (1.27 mm) Pitch IDC Systems.050" (1.27 mm) Pitch IDC Systems
Mates with .016" (0.41 mm) square post terminal strips.
Features
- High-performance Tiger Eye™ contacts
- Choice of socket and plug terminations
- Exceptionally low profile .200" (5.08 mm)
- Variety of options including strain relief
- Mating shrouded & ejector terminal strips
- Wide variety of standard wiring configurations
2.00 mm (.0787") Pitch Discrete Wire IDC System2.00 mm Pitch Discrete Wire IDC System
Cable-to-board system for ease of termination in field applications.
Features
- Components only, customer assembly
- No special tooling required
- Available in 2, 3, 4 or 5 positions
- Accepts 24 AWG discrete wire cable
- Standard single latch for locking
Flat Flexible Cable (FFC) SystemsFlat Flexible Cable Systems, ZIF Connectors and Jumpers
Flat Flexible Cable systems and jumpers featuring 0.50 mm (.0197") and 1.00 mm (.0394") pitch systems with standard and zero insertion force (ZIF) connectors
Features
- 0.50 mm (.0197") and 1.00 mm (.0394") pitch systems
- Standard and Zero Insertion Force (ZIF) connectors
© 2024 Samtec. All rights reserved.
Your Privacy Choices