The VCU110 ExaMAX® Loopback Card routes 8 GTY MGTs from the Xilinx® Virtex® UltraScale™ FPGA through the ExaMAX® mated connector pair and back to the FPGA.

Samtec's 14 Gbps FireFly™ FMC Module is VITA 57.1 compliant and provides up to 140 Gbps full-duplex bandwidth over 10 channels from an FPGA to an industry-standard multi-mode fiber optic cable.

Samtec's 25/28 Gbps FireFly^TM FMC+ Module is VITA 57.4 compliant and provides up to 400/448 Gbps full-duplex bandwidth over up to 16 channels from an FPGA to an industry-standard multi-mode fiber optic cable.

Test platform for real-time evaluation of copper or optical FireFly^™ Micro Flyover System^™ at 28 Gbps.

Test platforms for real-time evaluation of FireHawk Ruggedized Optical Transceivers.

Samtec's VITA 57.4 FMC+ HSPC Loopback Card provides FPGA designers an easy to use loopback option for testing low-speed and high-speed multi-gigabit transceivers on any FPGA development board or FPGA carrier card.

Samtec's VITA 57.4 FMC+ HSPC/HSPCe Loopback Card provides an easy to use loopback option for testing low and high-speed multi-gigabit transceivers on any FPGA development board or carrier card and, is an ideal substitute for 28 Gbps test equipment.

Samtec's VITA 57.1 FMC Extender Card increases board-to-board spacing on any FPGA development board or carrier card.

Samtec's VITA 57.4 FMC+ Extender Card increases board-to-board spacing on any FPGA development board or carrier card.

This loopback mezzanine card was based on an elongated version of the VITA 57.4 single width mezzanine card, designed for use with the Xilinx® UltraScale+ VCU118 Development board and is included in the VCU118 Development Kit available from Xilinx®.

Samtec's PCIe®-Over-Fiber Adaptor Cards enable long distance PCIe® Gen 3 interfaces in computer-to-computer and computer-to-end point applications while supporting transparent and non-transparent bridge links.