Webinar: Crosstalk Mitigation Strategies in 75 ohm 12G-SDI Systems

Presented by: Travis Ellis 12G-SDI Serial Digital Interface systems are architected around 75 Ohm single ended signaling. The cable reach of these systems is often degraded by the cross talk inherent in the interconnects used in these systems. This presentation will discuss common architectures and simple design enhancements that can improve cross talk by one to two orders of magnitude. Thus, providing cable reach closer to the ideal reach of greater than 100 meters.

There comes a time when every design must enter production. However, the path that any item takes from initial concept to final production is a complicated one, and it is […] The post From Design to Production appeared first on The Samtec Blog....
“The good news is, Samtec has more ways to stack two or more PC boards than anybody else in the connector industry,” I told a Designer when asked about our two-piece, […] The post Good News and Good News About Board Stacking Connector Solutions appeared first on The Samtec Blog....
As I write this post, we’re in the final stages of completing a massive project to upgrade all of the main product navigation pages on Samtec.com. The current navigation structure […] The post Here’s Your Preview of the New Samtec.com Navigation appeared first on The Samtec Blog....
Samtec open-pin-field arrays like SEARAY™ provide designers the ability to simultaneously run differential pairs, single-ended signals, and power through the same board-to-board interconnect. This design approach allows maximum pin-selection, routing, […] The post AMD XRF4 RF Acc...
Samtec showcased several high-performance, high-density active optical connector systems at DesignCon 2024. These were in addition to a booth full of Samtec Flyover® copper cable solutions rated at 224 and […] The post Good Optics: High-Performance, High-Density Active Optical C...