Webinar: Using Ferrites and Inductors in Power Distribution Networks (PDN)

Presented by: Istvan Novak Do You Really Need That Ferrite Bead in Your PDN? There are two distinctly different camps of designers: people in the first camp will categorically denounce the use of ferrite beads in power distribution networks (PDN), while people in the second camp will insist that the PDN they came up with really needs the ferrite beads. This webinar will walk you through the truth about both approaches and will show, with examples, under what circumstances is it a good idea (or not) to use ferrite beads.

There comes a time when every design must enter production. However, the path that any item takes from initial concept to final production is a complicated one, and it is […] The post From Design to Production appeared first on The Samtec Blog....
“The good news is, Samtec has more ways to stack two or more PC boards than anybody else in the connector industry,” I told a Designer when asked about our two-piece, […] The post Good News and Good News About Board Stacking Connector Solutions appeared first on The Samtec Blog....
As I write this post, we’re in the final stages of completing a massive project to upgrade all of the main product navigation pages on Samtec.com. The current navigation structure […] The post Here’s Your Preview of the New Samtec.com Navigation appeared first on The Samtec Blog....
Samtec open-pin-field arrays like SEARAY™ provide designers the ability to simultaneously run differential pairs, single-ended signals, and power through the same board-to-board interconnect. This design approach allows maximum pin-selection, routing, […] The post AMD XRF4 RF Acc...
Samtec showcased several high-performance, high-density active optical connector systems at DesignCon 2024. These were in addition to a booth full of Samtec Flyover® copper cable solutions rated at 224 and […] The post Good Optics: High-Performance, High-Density Active Optical C...