112 Gbps PAM4 Front Panel to Mid-Board - Samtec Flyover®
112 Gbps PAM4 Front Panel to Mid-Board - Samtec Flyover®
This demo, from DesignCon 2020, is a collaboration between Samtec and Alphawave. It emulates next generation data center equipment architectures, and incorporates Samtec Flyover® to improve signal integrity and architectural flexibility.
Products
FQSFP-DD
Double Density Flyover® QSFP Cable System
Features
- 8 channels (x8 bidirectional, 16 differential pairs)
- Up to 400 Gbps aggregate (56 Gbps PAM4)
- PCIe® 6.0/CXL® 3.1 capable
- Backward compatible with QSFP modules
- Belly-to-belly mating for maximum density
- Variety of end 2 options
- FQSFP-DD Evaluation Kits available
- 28 Gbps NRZ per channel
- Direct connect sidebands increase system airflow and eliminate the need for extra cables
NVAC
0.80 mm NovaRay® Extreme Density & Performance Socket Cable Assembly
Features
- 112 Gbps PAM4 per channel
- PCIe® 6.0/CXL® 3.1 capable
- 40% smaller than conventional cable solutions
- 34 AWG Eye Speed® twinax cable
- 2, 3 or 4 rows
- 1 or 2 banks with up to 16 pairs/bank
- Rugged metal latching system
NVAM-C
0.80 mm NovaRay® Extreme Density & Performance Terminal for NVAC Series
Features
- 112 Gbps PAM4 per channel
- PCIe® 6.0/CXL® 3.1 capable
- 40% smaller than conventional cable connectors
- Rugged metal latching for mating with NovaRay® cable assembly
- 2, 3 or 4 rows
- 1 or 2 banks with up to 16 pairs/bank
- Mates with NovaRay® cable assembly (NVAC Series)
BE40A
50 GHz, Bulls Eye® High-Performance Test Assembly
Features
- 56 Gbps PAM4 SerDes Characterization
- Enhanced system design with signal and ground pogo pin
- 2.40 mm (50 GHz) or 2.92 mm (40 GHz) connection to instrumentation
- Performance to 50 GHz
- Double row
- Microstrip/CPW or stripline PCB transmission
- 50 ohm impedance
- 23 AWG solid dielectric low loss microwave cable with additional copper shielding
- Replacement cables (BE40C Series) and block (BE40B Series) available
FQSFP-DD
Double Density Flyover® QSFP Cable System
Features
- 8 channels (x8 bidirectional, 16 differential pairs)
- Up to 400 Gbps aggregate (56 Gbps PAM4)
- PCIe® 6.0/CXL® 3.1 capable
- Backward compatible with QSFP modules
- Belly-to-belly mating for maximum density
- Variety of end 2 options
- FQSFP-DD Evaluation Kits available
- 28 Gbps NRZ per channel
- Direct connect sidebands increase system airflow and eliminate the need for extra cables
NVAC
0.80 mm NovaRay® Extreme Density & Performance Socket Cable Assembly
Features
- 112 Gbps PAM4 per channel
- PCIe® 6.0/CXL® 3.1 capable
- 40% smaller than conventional cable solutions
- 34 AWG Eye Speed® twinax cable
- 2, 3 or 4 rows
- 1 or 2 banks with up to 16 pairs/bank
- Rugged metal latching system
NVAM-C
0.80 mm NovaRay® Extreme Density & Performance Terminal for NVAC Series
Features
- 112 Gbps PAM4 per channel
- PCIe® 6.0/CXL® 3.1 capable
- 40% smaller than conventional cable connectors
- Rugged metal latching for mating with NovaRay® cable assembly
- 2, 3 or 4 rows
- 1 or 2 banks with up to 16 pairs/bank
- Mates with NovaRay® cable assembly (NVAC Series)
BE40A
50 GHz, Bulls Eye® High-Performance Test Assembly
Features
- 56 Gbps PAM4 SerDes Characterization
- Enhanced system design with signal and ground pogo pin
- 2.40 mm (50 GHz) or 2.92 mm (40 GHz) connection to instrumentation
- Performance to 50 GHz
- Double row
- Microstrip/CPW or stripline PCB transmission
- 50 ohm impedance
- 23 AWG solid dielectric low loss microwave cable with additional copper shielding
- Replacement cables (BE40C Series) and block (BE40B Series) available
Downloads
Literature
Blog Article
CONTACT SALES
First Name
Last Name
Company
Industry
Estimate Annual Usage
Family
Message
Don't want to fill out a form?
Chat with a product expert directly.
© 2024 Samtec. All rights reserved.
Your Privacy Choices